Vehicle Electronics Service Agreement

Section 01

CUSTOMER AUTHORITY

The Customer represents that they are:

The legal owner of the vehicle or equipment submitted for service; or

An individual legally authorized by the owner to approve diagnostics, repairs, installations, modifications, charges, and testing.

The Customer agrees to provide accurate ownership, contact, vehicle, and service information.

If the Customer is acting on behalf of another person, business, fleet, dealership, insurance company, or other entity, the Customer represents that they have authority to bind that party to this Agreement.

Section 02

SCOPE OF SERVICES

NS Electronics specializes in vehicle electronics services, including but not limited to:

Remote-start systems

Security and alarm systems

Immobilizer and anti-theft systems

Audio systems

Amplifiers and speakers

Radios and multimedia systems

Backup and parking cameras

Dash cameras

Radar detector installations

Accessory wiring

Lighting-related electronic accessories

Vehicle electrical diagnostics

Wiring repair

Integration modules

Data-bus interfaces

OEM and aftermarket electronic accessories

Powersports electronics

Removal or correction of previously installed aftermarket equipment

Troubleshooting of intermittent electrical concerns

The exact services authorized for a particular job will be documented on the applicable estimate, invoice, intake form, work order, written communication, or other service record.

Section 03

DIAGNOSTIC AUTHORIZATION

The Customer authorizes NS Electronics to perform reasonable diagnostic procedures necessary to investigate the reported concern.

Diagnostics may include:

Visual inspection

Removal of panels or trim

Accessing wiring harnesses

Electrical measurements

Circuit testing

Fuse and relay testing

Module communication testing

Scan-tool testing

Current-draw testing

Signal tracing

Continuity and resistance testing

Temporary disconnection of modules or accessories

Battery disconnection

Removal of aftermarket wiring

Test operation of electrical accessories

Road testing when reasonably necessary

Temporary installation of known-good components

Other standard diagnostic procedures

Diagnostic labor is chargeable whether or not the Customer ultimately authorizes a repair.

Payment for diagnostics compensates NS Electronics for technician time, equipment use, testing, research, inspection, and troubleshooting. It does not guarantee that every fault can be conclusively identified.

Section 04

DIAGNOSTIC LIMITATIONS

Modern vehicle electrical systems may contain complex interconnected modules, communication networks, proprietary software, encrypted data systems, intermittent faults, prior repairs, undocumented modifications, and vehicle-specific programming.

Accordingly, the Customer acknowledges that:

Some electrical faults may be intermittent and may not occur while the vehicle is at the shop.

A diagnostic procedure may identify one fault while additional faults remain hidden.

Repairing one problem may expose another previously masked problem.

Some failures cannot be conclusively identified without replacing or repairing a suspected component.

Manufacturer documentation may be incomplete or unavailable.

Aftermarket equipment may not have reliable technical documentation.

Obsolete or discontinued systems may not be repairable.

Replacement components may require programming, initialization, synchronization, or dealer-level access.

A diagnostic conclusion may change as additional information becomes available.

NS Electronics does not guarantee that an initial diagnosis will identify every present or future fault.

Section 05

ESTIMATES AND AUTHORIZATION

When practical, NS Electronics may provide an estimate before performing additional repair or installation work.

Estimates are based on the information reasonably available at the time and are not guarantees of final cost.

Additional conditions discovered during service may require:

Additional labor

Additional parts

Wiring repair

Connector replacement

Programming

Fabrication

Disassembly

Correction of previous workmanship

Removal of damaged hardware

Additional diagnostic time

NS Electronics will seek additional authorization when reasonably practical before materially exceeding an approved estimate.

Minor variations reasonably necessary to complete an authorized repair may be performed without obtaining separate authorization when permitted by applicable law.

The Customer may establish a maximum authorization amount in writing.

Section 06

LABOR CHARGES

Labor is billed according to the current NS Electronics labor rate, flat-rate service price, quoted installation price, or other pricing stated on the applicable work order or estimate.

Labor charges may include time spent:

Diagnosing

Installing

Removing equipment

Repairing wiring

Researching technical information

Accessing components

Reassembling the vehicle

Programming or configuring systems

Testing equipment

Performing post-repair verification

Correcting previous aftermarket installation work

Complex or poorly documented aftermarket systems may require significantly more diagnostic time than standard installations.

Section 07

MINIMUM CHARGES

Certain services may be subject to a minimum diagnostic, inspection, installation, or service charge.

The minimum charge applies to technician time and shop resources used to inspect or diagnose the vehicle, even if:

The problem cannot be duplicated

The Customer declines further work

No failed part is found

The issue is caused by an unrelated system

The system is determined to be non-serviceable

Repair is not economically practical

Applicable minimum charges will be disclosed through the work order, estimate, intake documentation, posted shop policies, or other customer communication.

Section 08

PARTS AND MATERIALS

The Customer authorizes NS Electronics to use parts, wire, terminals, connectors, hardware, fabrication materials, adhesives, fasteners, loom, solder, heat-shrink tubing, electrical protection devices, and other materials reasonably required to perform the authorized service.

Parts may be:

New

Remanufactured

Refurbished

Used

OEM

Aftermarket

Special-order

when appropriate and disclosed or reasonably necessary for the repair.

Parts pricing may include acquisition costs, shipping, handling, sourcing, warranty administration, inventory costs, and related business expenses.

Section 09

SPECIAL-ORDER PARTS

Special-order parts may require advance payment.

Unless otherwise required by law, deposits and payments made for specially ordered, programmed, custom, non-returnable, vehicle-specific, or customer-approved electronic components may be non-refundable once ordered.

The Customer is responsible for special-order parts purchased pursuant to their authorization even if the Customer later decides not to proceed with installation.

Section 10

CUSTOMER-SUPPLIED PARTS

NS Electronics may, at its discretion, install customer-supplied equipment or components.

NS Electronics reserves the right to refuse installation of any customer-supplied component that appears:

Incorrect

Damaged

Unsafe

Counterfeit

Incompatible

Incomplete

Poor quality

Previously modified

Improperly specified

Customer-supplied parts are not covered by an NS Electronics parts warranty.

If a customer-supplied component is defective, incorrect, incompatible, or causes additional labor, the Customer remains responsible for all labor performed.

Removal and replacement of failed customer-supplied equipment is separately chargeable.

Section 11

USED AND PREVIOUSLY INSTALLED EQUIPMENT

NS Electronics does not guarantee the condition, reliability, compatibility, or remaining service life of used, previously installed, refurbished, salvaged, discontinued, or unknown-history components.

Installation of such equipment is performed at the Customer's risk unless otherwise specifically agreed in writing.

Section 12

EXISTING AFTERMARKET EQUIPMENT

The Customer agrees to disclose known aftermarket electronic equipment installed in the vehicle.

Examples include:

Remote starters

Alarm systems

GPS trackers

Audio systems

Amplifiers

Dash cameras

Lighting modules

Trailer wiring

Fleet equipment

Interlock devices

Telematics

Performance electronics

Previous accessory wiring

Undisclosed aftermarket equipment may increase diagnostic time and repair cost.

NS Electronics is not responsible for defects, wiring errors, poor workmanship, damage, programming issues, or compatibility problems caused by equipment installed by others.

Section 13

CORRECTION OF PRIOR WORKMANSHIP

When NS Electronics encounters unsafe, damaged, undocumented, poorly routed, improperly fused, improperly grounded, spliced, corroded, modified, or otherwise questionable prior wiring, additional corrective work may be necessary before NS Electronics can responsibly complete the requested service.

Examples include:

Scotch-lock or insulation-displacement connectors

Loose crimps

Twisted-and-taped connections

Improper fuse protection

Undersized wiring

Damaged insulation

Corroded connections

Incorrect grounding

Poorly secured modules

Improperly routed wiring

Exposed conductors

Non-OEM modifications

Previously cut factory harnesses

NS Electronics may stop work if existing conditions create a safety or reliability concern.

Additional corrective work may require additional authorization and charges.

Section 14

VEHICLE DISASSEMBLY

The Customer authorizes reasonable disassembly necessary to access vehicle electronics.

This may include removal of:

Dash panels

Trim panels

Seats

Consoles

Door panels

Pillar trim

Carpeting

Interior panels

Under-dash covers

Glove compartments

Cargo trim

Factory radio components

Other interior components

NS Electronics will use reasonable care when removing and reinstalling vehicle components.

Section 15

PRE-EXISTING CONDITION AND AGE-RELATED DAMAGE

Vehicle plastics, clips, fasteners, trim, wiring, adhesives, upholstery, and other components may become brittle or deteriorated due to:

Age

Sun exposure

Heat

Cold

Previous disassembly

Prior repairs

Chemical exposure

Corrosion

Wear

Manufacturer design

Environmental conditions

NS Electronics is not responsible for unavoidable failure of deteriorated, brittle, previously damaged, weakened, or improperly repaired components during reasonable service procedures.

When practical, the Customer will be notified if replacement trim, clips, fasteners, or related components are required.

Section 16

EXISTING VEHICLE DAMAGE

Customers are encouraged to disclose existing cosmetic, electrical, or mechanical damage before service.

NS Electronics may photograph or document the vehicle before, during, or after service for condition verification, repair documentation, warranty administration, training, quality control, insurance purposes, and internal records.

Existing scratches, dents, stains, broken trim, missing fasteners, malfunctioning equipment, warning lights, electrical faults, or other conditions may be noted on the work order.

Section 17

PHOTOGRAPHY AND SERVICE DOCUMENTATION

The Customer authorizes NS Electronics to photograph or video:

The vehicle

Vehicle identification information

Wiring

Connectors

Components

Damage

Installation areas

Diagnostic readings

Repair procedures

Completed workmanship

These records may be retained as part of the service file.

NS Electronics will not intentionally publish personally identifying customer information without permission.

General repair photographs that do not disclose sensitive customer information may be used for internal training, documentation, warranty purposes, or business marketing unless the Customer specifically requests otherwise in writing.

Section 18

VEHICLE DATA AND ELECTRONIC INFORMATION

Modern vehicles may contain stored electronic data.

Diagnostic procedures may require communication with vehicle computers or aftermarket modules.

NS Electronics may access information reasonably necessary to perform authorized service, including:

Diagnostic trouble codes

Module identification

Configuration data

Software versions

Battery voltage history

Network communication information

Vehicle-specific programming information

NS Electronics does not intentionally access unrelated personal content unless necessary for the authorized service.

Customers should remove or secure sensitive personal information before leaving a vehicle for service.

Section 19

PERSONAL PROPERTY

Customers should remove valuables and unnecessary personal property before leaving a vehicle.

NS Electronics is not responsible for loss or damage to cash, firearms, electronics, documents, jewelry, tools, removable media, personal accessories, or other personal property left inside the vehicle unless caused by NS Electronics' negligence and required by applicable law.

Section 20

BATTERY CONDITION

Electrical diagnosis, programming, testing, remote-start installation, security-system installation, and accessory work may place additional load on the vehicle battery.

A weak, discharged, deteriorated, or failing battery may affect diagnostic results or electronic-system operation.

The Customer authorizes reasonable battery charging, maintenance charging, or support during service when necessary.

NS Electronics is not responsible for a battery that fails during or following service due to pre-existing age, wear, deterioration, internal failure, or inadequate capacity.

Battery replacement, when necessary, requires Customer authorization unless otherwise permitted by the applicable work order.

Section 21

MODULE PROGRAMMING AND SOFTWARE

Some installations or repairs may require:

Module programming

Firmware updates

Flash programming

Vehicle relearning

Security access

Key programming

Configuration changes

Software activation

Online manufacturer services

Programming procedures may carry inherent risks, including interruption, corrupted programming, module lockout, software incompatibility, or failure of an already compromised electronic module.

NS Electronics will use reasonable care when performing programming procedures but cannot guarantee the continued operation of a failing, damaged, previously modified, or unstable module.

Third-party programming charges, software licenses, subscriptions, security-access fees, dealer programming, or manufacturer charges may be billed separately.

Section 22

FACTORY WARRANTY AND LEASED VEHICLES

The Customer is responsible for determining whether aftermarket installation or modification may affect:

Factory warranty coverage

Extended warranty coverage

Lease conditions

Insurance coverage

Manufacturer service agreements

Fleet policies

NS Electronics does not represent that an aftermarket installation will or will not affect a manufacturer, dealer, insurer, lessor, or third-party warranty decision.

Section 23

REMOTE START SYSTEMS

The Customer understands that remote-start systems interact with factory ignition, security, immobilizer, communication, climate-control, and safety systems.

Remote-start functionality may vary based on:

Vehicle design

Factory programming

Vehicle trim level

Manufacturer limitations

Transmission type

Climate-control configuration

Firmware availability

Cellular service

Third-party servers

Vehicle battery condition

Certain factory behaviors may change when a remote-start system is installed.

Possible behaviors include:

Engine shutdown when a door is opened

Key takeover requirements

Reduced runtime

Limited climate control

Factory alarm interaction

Delayed accessory activation

Parking-light behavior

Temporary dashboard messages

Some limitations are vehicle-specific and cannot be altered by NS Electronics.

Section 24

REMOTE START SAFETY

The Customer agrees never to use remote start:

Inside a garage or enclosed structure

Where exhaust gases may accumulate

While the vehicle is being serviced

When a person or animal is in a dangerous position near the vehicle

When the vehicle is unsafe to operate

When prohibited by law

Under circumstances that could create a hazard

The Customer is responsible for safe and lawful operation of the remote-start system.

Section 25

SECURITY AND ALARM SYSTEMS

Security and alarm systems are deterrent devices.

NS Electronics does not guarantee that an alarm, immobilizer, security system, GPS system, tracker, or related device will prevent:

Theft

Vandalism

Vehicle damage

Unauthorized entry

Towing

Property loss

No security device can eliminate all risk.

NS Electronics is not an insurer and does not assume responsibility for theft or loss merely because a security device was installed or serviced by NS Electronics.

Section 26

CELLULAR, GPS, CLOUD, AND APP-BASED SERVICES

Some products rely on third-party infrastructure such as:

Cellular networks

GPS services

Smartphone applications

Manufacturer servers

Cloud services

Subscription services

Bluetooth connectivity

Internet connectivity

NS Electronics does not control these third-party services.

Service availability, pricing, compatibility, features, or functionality may change without notice.

NS Electronics is not responsible for outages, discontinued applications, discontinued servers, subscription changes, cellular-network changes, or manufacturer decisions affecting such services.

Section 27

AUDIO SYSTEMS

High-power audio equipment can exceed the capabilities of factory charging systems, speakers, wiring, alternators, batteries, and electrical systems.

The Customer understands that aftermarket audio upgrades may require:

Larger power wiring

Additional grounding

Battery upgrades

Alternator upgrades

Fuse upgrades

Speaker upgrades

Sound treatment

Charging-system modifications

NS Electronics is not responsible for failures caused by operating equipment beyond the rated capability of the vehicle or installed components.

Section 28

AFTERMARKET LIGHTING AND ACCESSORIES

The Customer acknowledges that aftermarket lighting or accessory equipment may be subject to federal, state, or local restrictions.

The Customer is responsible for lawful use of installed accessories.

Unless specifically agreed otherwise, NS Electronics does not represent that every aftermarket product is legal for every road, jurisdiction, or operating condition.

Section 29

TESTING AND ROAD TEST AUTHORIZATION

The Customer authorizes NS Electronics employees, owners, technicians, or authorized representatives to operate or road-test the vehicle when reasonably necessary for:

Diagnosis

Verification

Calibration

Testing

Repair confirmation

Remote-start testing

Noise diagnosis

Intermittent electrical fault diagnosis

Reasonable road testing may occur on public roads.

The Customer represents that the vehicle is legally registered, insured, and safe to operate unless otherwise disclosed.

Section 30

VEHICLE SAFETY CONDITION

The Customer agrees to inform NS Electronics of known safety issues, including:

Brake problems

Steering problems

Fuel leaks

Electrical fire concerns

Unsafe tires

Transmission problems

Mechanical defects

Airbag faults

Significant battery problems

Structural damage

Other conditions that could make the vehicle unsafe to operate

NS Electronics may refuse to operate or service a vehicle that appears unsafe.

Section 31

AIRBAG AND SAFETY-RESTRAINT SYSTEMS

Certain electronics are located near airbags, seat-belt pretensioners, occupant-detection systems, and other safety-restraint components.

NS Electronics will use reasonable industry practices when working near these systems.

The Customer must disclose known airbag or supplemental-restraint-system faults.

NS Electronics may refuse work that would require unsafe modification of a factory safety system.

Section 32

WARNING LIGHTS AND DIAGNOSTIC TROUBLE CODES

Vehicle modules may store diagnostic trouble codes during:

Battery disconnection

Module disconnection

Diagnostic testing

Installation procedures

Programming

Component removal

Some temporary codes may clear automatically or require manual clearing.

NS Electronics is not responsible for unrelated pre-existing warning lights or faults.

Section 33

VEHICLE SETTINGS

Battery disconnection or electronic service may reset or alter certain vehicle settings, including:

Clock

Radio presets

Window initialization

Seat memory

Steering-angle calibration

Climate settings

Trip data

Infotainment preferences

Other stored settings

NS Electronics will restore settings when practical but does not guarantee preservation of all stored vehicle preferences or data.

Section 34

KEYS AND REMOTES

The Customer authorizes NS Electronics to possess and use vehicle keys, key fobs, remotes, and security devices while the vehicle is being serviced.

The Customer should provide all keys or remotes reasonably necessary for programming or testing when requested.

Programming some systems may erase previously programmed keys or remotes if they are not present during programming.

The Customer is responsible for informing NS Electronics of all active keys and remotes.

Section 35

NO GUARANTEE OF COMPATIBILITY WITH FUTURE MODIFICATIONS

NS Electronics cannot guarantee compatibility between completed work and future:

Software updates

Manufacturer recalls

Dealer programming

Vehicle modifications

New aftermarket equipment

Replacement modules

Battery-management changes

Factory firmware revisions

Future modifications may require additional labor or reconfiguration.

Section 36

WORKMANSHIP WARRANTY

NS Electronics warrants its installation and repair workmanship for the period stated on the applicable invoice, estimate, warranty document, or service record.

Warranty coverage applies only to defects directly attributable to NS Electronics workmanship.

Warranty service must be performed by NS Electronics unless NS Electronics provides written authorization for another repair facility to perform the work.

Section 37

PARTS WARRANTY

Parts warranties are subject to the terms of the applicable manufacturer, distributor, supplier, or NS Electronics warranty policy.

Warranty coverage may exclude:

Labor

Shipping

Removal

Reinstallation

Programming

Diagnostic time

Consequential damage

unless specifically stated otherwise.

Section 38

WARRANTY EXCLUSIONS

Warranty coverage does not apply to problems caused by:

Abuse

Misuse

Accident

Collision

Water intrusion

Corrosion

Fire

Lightning

Flooding

Improper jump-starting

Reverse polarity

Battery failure

Alternator failure

Over-voltage

Under-voltage

Vehicle mechanical failure

Customer modification

Third-party modification

Unauthorized repair

Tampering

Rodent damage

Environmental exposure

Manufacturer defects

Software changes

Normal wear

Customer-supplied parts

Components unrelated to NS Electronics' work

Section 39

WARRANTY DIAGNOSIS

A Customer requesting warranty service authorizes NS Electronics to diagnose the reported concern.

If the issue is determined to be covered by warranty, applicable diagnostic charges may be waived according to the NS Electronics warranty policy.

If the concern is unrelated to NS Electronics' work or is excluded from warranty coverage, normal diagnostic and labor charges apply.

Section 40

NO CONSEQUENTIAL LOSS GUARANTEE

To the fullest extent permitted by law, NS Electronics is not responsible for indirect or consequential losses resulting from vehicle downtime or equipment failure, including:

Lost income

Lost business

Missed work

Rental vehicles

Towing

Travel expenses

Loss of use

Lost data

Missed appointments

except where such limitation is prohibited by law.

Section 41

REPAIR COMPLETION AND CUSTOMER NOTIFICATION

NS Electronics will make reasonable efforts to contact the Customer when:

Authorization is required

Additional problems are discovered

Parts are needed

Service is completed

A vehicle is ready for pickup

The Customer is responsible for maintaining current telephone, email, and contact information.

Failure to respond may delay completion of the service.

Section 42

COMMUNICATION AUTHORIZATION

The Customer authorizes NS Electronics to communicate regarding the service using:

Telephone calls

Voicemail

SMS/text messaging

Email

Electronic invoicing

Other reasonable electronic communication methods

Standard carrier messaging or data rates may apply.

Section 43

COMPLETION TIMES

Any completion date or turnaround estimate is an approximation unless explicitly guaranteed in writing.

Completion may be delayed by:

Parts availability

Shipping

Manufacturer support

Diagnostic complexity

Programming access

Supplier delays

Additional discovered faults

Customer response time

Equipment failure

Events outside the reasonable control of NS Electronics

NS Electronics is not responsible for losses caused by reasonable service delays.

Section 44

PAYMENT

Unless otherwise agreed in writing, payment is due upon completion of service and before release of the vehicle, parts, keys, or equipment.

NS Electronics may require advance payment for:

Special-order parts

Custom equipment

Large installations

Programming

Major repair jobs

Other services at its discretion

The Customer is responsible for all authorized charges.

Section 45

VEHICLE RELEASE

NS Electronics may retain possession of the vehicle, keys, equipment, or serviced property until all amounts due are paid, subject to applicable Montana law.

Release of a vehicle does not waive any outstanding balance.

Section 46

STORAGE CHARGES

Completed vehicles should be picked up promptly after notification.

NS Electronics may assess reasonable storage charges when a completed vehicle remains at the shop beyond the pickup period stated on the invoice, work order, posted shop policy, or customer notification.

Extended storage may be subject to additional terms allowed by Montana law.

Section 47

ABANDONED VEHICLES OR PROPERTY

Vehicles, equipment, parts, or personal property left with NS Electronics for an extended period without customer communication may be considered abandoned and handled according to applicable Montana law.

NS Electronics may pursue:

Storage charges

Lien rights

Collection

Removal

Disposal

Other remedies permitted by law

after required notices and procedures have been followed.

Section 48

PARTS REMOVED FROM VEHICLE

Removed parts may be:

Returned to the Customer upon request

Retained for warranty purposes

Returned to a supplier as a core

Disposed of

Recycled

depending on the circumstances.

The Customer must request return of replaced parts before service is completed.

Parts subject to a core charge, manufacturer warranty return, legal restriction, hazardous-material requirement, or supplier return obligation may not be available for return.

Section 49

VEHICLE CLEANLINESS AND ACCESS

The Customer agrees to provide reasonable access to areas necessary to perform service.

Excessive personal property, debris, hazardous materials, unsanitary conditions, animal waste, pests, or inaccessible work areas may result in:

Additional labor charges

Service delay

Refusal of service

Section 50

HAZARDOUS OR UNSAFE CONDITIONS

NS Electronics reserves the right to stop work if technicians encounter conditions that create an unreasonable safety hazard.

This may include:

Damaged high-current wiring

Exposed battery conductors

Fuel leaks

Unsafe high-voltage systems

Fire damage

Flood damage

Biohazards

Structural damage

Active short circuits

Improperly secured batteries

The Customer remains responsible for work already performed.

Section 51

HYBRID AND ELECTRIC VEHICLES

Hybrid and electric vehicles may contain high-voltage electrical systems capable of causing serious injury or death.

NS Electronics may limit the scope of work performed on these vehicles.

Unless specifically authorized and equipped to do so, NS Electronics does not perform service requiring opening, modifying, repairing, or directly accessing high-voltage battery or propulsion circuits.

Section 52

RIGHT TO REFUSE OR STOP SERVICE

NS Electronics reserves the right to refuse or stop service when:

The requested work appears unsafe

The requested modification may violate law

The vehicle condition creates an unreasonable hazard

The Customer requests deceptive or improper work

Required parts or information are unavailable

The Customer refuses necessary corrective work

Continued work would likely damage the vehicle

The Customer becomes abusive, threatening, or refuses agreed payment terms

The Customer remains responsible for authorized work already performed.

Section 53

LIMITATION OF LIABILITY

To the fullest extent permitted by law, NS Electronics' liability arising from a service transaction shall be limited to direct damages resulting from proven negligence, defective workmanship, or other liability that cannot legally be excluded.

Nothing in this Agreement is intended to waive rights or remedies that cannot lawfully be waived under Montana or federal law.

Section 54

INSURANCE

The Customer is responsible for maintaining legally required vehicle insurance.

The Customer agrees to promptly notify NS Electronics of any alleged loss or damage believed to have occurred while the vehicle was under NS Electronics' control.

NS Electronics must be given a reasonable opportunity to inspect and document any claimed damage before another party performs repairs.

Section 55

DISPUTED WORK

If a Customer believes there is a problem with NS Electronics' workmanship, the Customer agrees to provide NS Electronics a reasonable opportunity to inspect and, when appropriate, correct the alleged problem before authorizing another repair facility to alter the work.

Unauthorized modification of the disputed repair may affect the ability to determine cause and may affect warranty coverage.

Section 56

THIRD-PARTY REPAIRS

NS Electronics will not be responsible for charges incurred at another repair facility unless NS Electronics approved those charges in writing before the work was performed.

Section 57

COLLECTION COSTS

If an unpaid balance is referred for collection or legal action, the Customer may be responsible for reasonable collection expenses, court costs, and attorney fees to the extent permitted by applicable law.

Section 58

GOVERNING LAW

This Agreement shall be governed by the laws of the State of Montana.

Any provision that conflicts with mandatory Montana or federal law shall be interpreted or limited only to the extent necessary to comply with applicable law.

Section 59

SEVERABILITY

If any section of this Agreement is determined to be invalid or unenforceable, the remaining provisions shall remain in effect to the fullest extent permitted by law.

Section 60

NO ORAL MODIFICATION

Statements by employees, installers, technicians, vendors, or other persons do not modify this Agreement unless the modification is confirmed by NS Electronics in writing.

Section 61

ELECTRONIC AUTHORIZATION

Electronic approval, digital signature, text-message authorization, email authorization, online approval, payment, or other documented electronic consent may constitute authorization to perform work and acceptance of applicable service terms.

Section 62

ENTIRE AGREEMENT

This Agreement, together with the applicable:

Work order

Estimate

Invoice

Intake form

Written authorization

Warranty terms

Product-specific documentation

constitutes the agreement governing the applicable service transaction.

If a specific written work order conflicts with a general term of this Agreement, the specific written work-order term controls for that transaction.